90degree or 35 degree Ring doorbell Gen2 2020 swivel rotating mount for best viewing angle
This swivel doorbell mount is for the Ring Video Doorbell gen2 release which is the $99doorbell by Ring that does not have removable battery pack. Does not fit any other ring doorbell.
There are 2 swivel options 90 degree for right angle viewing and 35 degree for straight on viewing up to 35 degrees up down or side.
This swivel mount can adjust to whatever angle is needed so you can see the most area on your display device. Up / down / either side, you adjust the angle and when you have the angle perfect, you screw in the setscrew.
Use over any siding that has the slats at less than 3 1/8in. You can also rotate the mount sidewalls to fit siding slats less than 2in. You can fit this doorbell anywhere if you can screw it in. The bottom is flare so if you rent, then command strips or Velcro can be used.
This mount can adjust near 15-90 degrees in the horizontal, and up to 35 in the vertical.
If you wanted to, you can see the bottom of your door with the proper adjustment and see the packages at your doorstep ( with 35 degree) Choose whatever angle you like and lock it in
This mount is customizable for just about any doorbell if you want to give me the dimensions.
Designed and printed by me, and 3D printed using quality PETG material. PETG is much better at weather resistance than most others who print in PLA.
It only fits Ring video Doorbell gen2 - 2020 release with non removable battery
It may fit other models but not guaranteed. Message me and I can let you know if I have one that would fit
standard color is black. White is $2 additional, other colors $3, and stainable wood $10.
This listing does not include the doorbell.
Options include the backplate that mounts on the wall in case you have a big hole to cover.
Small Backplate is 2.5in x 4in
medium backplate is 3in x 4.5in
XL backplate is 4.25 x 6.25
New.
Narrow Backplate that can fit in 3/4in wide area
The tall narrow backplate has a 1 inch extension to get the mount away from door casing.
The base bracket that attaches to the wall is 1.8 inches at widest point and 3.11 inches long.